NL10276AC30-04R NL10276AC30-04R 15.0 inche 1024 � 768 pixels, 262,144 colors,
LVDS interface, Wide viewing angle, High luminance
Items Description
Display area 304.128 (H) � 228.096 (V) mm
Drive system a-Si TFT active matrix
Display colors 262,144 colors
Number of pixels 1024 � 768 pixels
Pixel arrangement RGB vertical stripe
Pixel pitch 0.297 (H) � 0.297 (V) mm
Module size 350.0 (H) � 265.0 (V) � 20.0 (typ.) (D) mm
Weight 1350 g (typ.)
Contrast ratio 200 : 1 (typ.)
Viewing angle (more than the
contrast ratio of 10 : 1)
� Horizontal : 60� (typ., left side, right side)
� Vertical : 40� (typ., up side), 50�(typ., down side)
Designed viewing direction � Wider viewing angle without image reversal : up side (12 o�clock)
� Wider viewing angle with contrast ratio: down side (6 o�clock)
� Optimum grayscale (g = 2.2): perpendicular
Color gamut 40% (typ., at center, to NTSC)
Response time 15 ms (typ.), �white 100%� to �black 10%�
Luminance 200 cd/m2 (typ.)
Signal system RGB 6-bit signals, Synchronous signals (Hsync, Vsync), Dot clock (CLK)
LVDS interface (Equivalent of THC63LVDF64A, THine Electronics, Inc.) 1 port
Supply voltage 5 V (Logic, LCD driving), 12 V (Backlight)
Backlight Edge light type: Two cold cathode fluorescent lamps with inverter
� Lamp holder: type No.150 LHS11
� Inverter: type No.141PW201
Power consumption 11.8 W (typ.)
INTERFACE AND CONNECTOR PIN ASSIGNMENT
(1) Interface connector for signal and power
Part No. : FI-SE20P-HF
Adaptable socket: FI-SE20M
Supplier : Japan Aviation Electronics Industry Limited (JAE)
CN1
Pin No. Symbol Signal type Function
1 GND
2 GND
Ground Note 1
3 NC
4 NC
Non-connection �
5 GND Ground Note 1
6 CK+
7 CK�
Pixel clock CLK for pixel data f = 65 MHz (typ.)
(LVDS level)
8 GND Ground Note 1
9 D2+
10 D2�
Pixel data LVDS differential data input
11 GND Ground Note 1
12 D1+
13 D1�
Pixel data LVDS differential data input
14 GND Ground Note 1
15 D0+�
16 D0�
Pixel data LVDS differential data input
17 GND
18 GND
Ground Note 1
19 VCC
20 VCC
+5.0 V power supply Supply +5.0 V �5%
Notes 1: GND is Signal ground for logic and LCD driving. The GND should be connected to system
ground. The GND is not connected to FG (Frame Ground) in this module.
2: Connect all pins (expect 3.4) to the appointed places to avoid noise problems.
Use 100 W twist pair wires for the cabl
NEC Part Number NL10276AC30-04R Panel Type TFT Panel Size 15 Panel Resolution 1024 x 768 XGA.
datasheet at http://www.pointosale.co.uk/datasheets/NL10276AC30-04R.pdf
