NL8060BC31-32 30.8cm (12.1 Type) SVGA
GENERAL SPECIFICATIONS
Display area 246.0 (H) � 184.5 (V) mm
Diagonal size of display 30.8 cm (12.1 inches)
Drive system a-Si TFT active matrix
Display color 262,144 colors
Pixel 800 (H) � 600 (V) pixels
Pixel arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe
Dot pitch 0.1025 (H) � 0.3075 (V) mm
Pixel pitch 0.3075 (H) � 0.3075 (V) mm
Module size 280.0 (W) � 210.0 (H) � 13.0 (D) mm (typ.)
Weight 740 g (typ.)
Contrast ratio At transmissive mode
600:1 (typ.)
Viewing angle
At transmissive mode and the contrast ratio≥ 10:1
� Horizontal: Right side 70� (typ.), Left side 70� (typ.)
� Vertical: Up side 45� (typ.), Down side 55� (typ.)
Designed viewing direction
At transmissive mode and DPS= Low or Open: Normal scan
� Viewing direction without image reversal: up side (12 o'clock)
� Viewing direction with contrast peak: down side (6 o'clock)
� Viewing angle with optimum grayscale (γ=2.2): normal axis
Polarizer surface Clear + Antireflection (AR)
Polarizer pencil-hardness 3H (min.) [by JIS K5400]
Color gamut At transimissive mode and LCD panel center
40 % (typ.) [against NTSC color space]
Response time At transimissive mode, Ton+Toff (10%←→ 90%)
33 ms (typ.)
Luminance At transimissive mode and IBL= 5.0mArms / lamp
400 cd/m2 (typ.)
Reflectance At reflective mode
2.0 % (typ., reference)
Signal system
6-bit digital signals for data of RGB colors,
Dot clock (CLK), Data enable (DE),
Horizontal synchronous signal (Hsync),
Vertical synchronous signal (Vsync)
Power supply voltage LCD panel signal processing board: 3.3V or 5.0V
Backlight
Edge light type: 2 cold cathode fluorescent lamps
Replaceable part
� Lamp holder set: Type No. 121LHS18
Recommended inverter (Option)
� Inverter: Type No. 121PW181
Power consumption At IBL=5.0mArms / lamp and checkered flag pattern
6.4 W (typ., Power dissipation of the inverter is not included.)
Used in many applications including ATM machines
http://www.pointosale.co.uk/datasheets/NL8060BC31-32-d.pdf
