Lcd test cards full kit, XGA card, WXGA card, and WXGA+ card
3�X Display Card� XGA card, WXGA card, and WXGA+ (covers most lcd's from 14" upwards to 17.1", that are these resolutions) including 15.4" standards
1�X Control Board
1 X DC Jack (2.5mm X 5.5mm)
1�X LCD Inverter
1 X VGA Cable (Input)
7�X LCD Cable (Output) you need to figure out which cable is for your lcd, its not difficult, the higher the resolution the more pins used on the cable
- These test cards are for testing lcd's or LED's depending on which one you order in the workshop
They plug into the three-row 15-pin DE-15 connector, on any pc, or external port a laptop, this then gives the signal to the test board and the picture, on the laptop is the one shown on the lcd panel.
Ideally suited for any test application, and any workshop, to allow you to test lcd's led's and an nice easy way to test ccfl tubes, you dont have to have the test signal plugged in just plug in the bul, or lcd / led to the inverter and switch on, the bulb will then come on if working.
